What To Do If Your Water Heater Unexpectedly Stops Working
What To Do If Your Water Heater Unexpectedly Stops Working
Blog Article
They are making a number of good observations related to How to Troubleshoot and Repair an Electric Water Heater in general in the article following next.
Many modern-day residences use an electric hot water heater for their furnace, because of its ease as well as ease of use. Nonetheless, much like any other electric devices, problems may emerge with its use, unexpectedly. It can be actually frustrating to awaken to a chilly shower as opposed to a warm one or having your bath with water that isn't warm sufficient or perhaps as well warm. Whatever the case may be, hot water heater problems can be rather nerve-racking. The good news is, we've made a listing of possible options to your hot water heater problems. There are a number of elements that might create most of these problems, it could be a concern with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you shut off the primary power supply for security. Whatever the issue is, getting it taken care of must not posture too much of an issue if you comply with these steps:
Inspect Your Power Supply:
As fundamental as this may seem, it is extremely essential. Without adequate power, your water heater will certainly not operate. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Examine if the fuse is burnt out or the breaker stumbled. If the breaker is the concern, merely transform it on and off once again. Change any type of damaged or damaged fuse. Check the home appliance with power after these modifications to see if it's now working.
Check the Heating Element in the Water Heater:
If it's not a power trouble, after that attempt looking into your burner if it is still functioning. Evaluate each of your heating elements to be sure the problem isn't with any of them. If any one of them is malfunctioning, replace that part and afterwards examine whether the warm water is back on.
Inspect Your Thermostat:
If your water heater still isn't working or the water coming out isn't warm enough, you may require to examine the temperature settings on your upper thermostat. Ensure the breaker is turned off before doing anything. Open the accessibility panel and also press the red switch for temperature reset above the thermostat. This need to assist heat the water. Turn the breaker back on as well as check if the problem has actually been solved.
Call An Expert:
If after replacing all malfunctioning parts and resetting your temperature level, the hot water heater still isn't working, you might need to contact a specialist plumber for an expert opinion. The trouble with your heating unit could be that the hot and cold faucets have been switched or it might be undersized for the amount of hot water required in your home. Whatever the instance might be, a professional plumber would certainly assist address the problem.
Verdict
Hot water heater problems are not constantly major. Most of them result from minor problems like a blown fuse or damaged burner. Changing the malfunctioning parts ought to do the trick. However, if you are still incapable to fix the issue, give a call to your closest plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I stumbled upon that piece about Hot Water Heater Repair while scouting around the search engines. For those who enjoyed our post kindly make sure you remember to share it. I value reading our article about Hot Water Heater Repair.
Schedule Now!
Report this page